The price ranges on this page are based on recent garage door repairs and installations completed throughout Orange County. Final pricing depends on the specific door, the parts required, and the condition found during the on-site inspection – call (714) 464-2881 for an exact, no-surprise quote. Prices reviewed: July 2026.
How much does a new garage door cost in Orange County?
A new garage door in Orange County typically costs $1,000–$2,200 installed for a single steel door and $1,500–$3,500 for a standard double door. Insulated or premium steel runs $2,500–$4,500, and custom wood or glass-aluminum doors start around $4,000 and climb past $12,000. Price covers the door plus professional installation. Full breakdown below.
A new door is one of the highest-return home upgrades in Orange County — it boosts curb appeal, security, energy efficiency, and resale value. Because it’s a larger investment, we offer free on-site estimates and financing on qualifying jobs.
Orange County new garage door cost table (2026)
| Line item | Typical low | Typical high | Notes |
|---|---|---|---|
| Single steel door, installed | $1,000 | $2,200 | Non-insulated to insulated |
| Double steel door, installed | $1,500 | $3,500 | Most OC two-car garages |
| Insulated / premium steel (double) | $2,500 | $4,500 | Higher R-value, thicker gauge |
| Wood / custom / glass-aluminum | $4,000 | $12,000+ | Coastal and custom homes |
| Old-door removal & haul-away | $75 | $250 | Often bundled into the install |
| Permit (if required) | $50 | $300 | Varies by Orange County city |
- Standard installation: half a day to a full day, old door removal included
- Custom, oversized, or wind-rated doors can take longer
- Measurement visit first – the quote is built from your exact opening
What affects new garage door cost?
- Material. Steel is the most popular and best value in Orange County. Wood, glass-aluminum (modern coastal look), and full-view glass cost considerably more.
- Single vs. double. A double door uses roughly twice the material and more labor than a single.
- Insulation / R-value. Insulated doors cost more upfront but cut garage heat, reduce noise, and help adjacent rooms — valuable in inland OC summers.
- Gauge and durability. Thicker steel and corrosion-resistant finishes are worth it in coastal cities where salt air attacks thin panels and hardware.
- Windows, hardware, and finish. Decorative glass, custom colors, and faux-wood overlays raise the price.
- Opener and accessories. If you’re adding or upgrading an opener, see garage door opener installation cost.
- Permits. Some Orange County cities require a permit for a full door replacement; fees vary by jurisdiction.
What’s included (and what isn’t)
A typical new-door quote includes the door, tracks, hardware, springs, installation, and haul-away of the old door, plus a manufacturer warranty and our labor warranty. It generally does not include a new opener (quoted separately), electrical work, structural framing changes, or city permit fees, which we’ll itemize when they apply.
New Garage Door Cost by Material
Material sets the baseline price of a new door more than any other choice — and in Orange County it’s also a durability decision, because coastal air is unkind to the wrong material.
Related guides: planning a replacement? Use our garage door buyer’s guide, compare looks in the styles and materials guide, and learn how to measure for a new garage door.
| Material | Installed range (double door) | Best for |
|---|---|---|
| Steel | $1,500–$3,500 | Best value; most OC homes |
| Premium insulated steel | $2,500–$4,500 | Attached garages, rooms above |
| Aluminum & glass | $4,000–$8,500 | Modern coastal architecture |
| Composite / faux wood | $3,500–$9,000 | Wood look without wood upkeep |
| Solid wood / custom | $4,000–$12,000+ | Custom and luxury homes |
Steel
Steel is the default for a reason: the widest style selection, the best price-to-durability ratio, and factory finishes that shrug off Orange County sun. Gauge matters — a 24-gauge skin resists dents noticeably better than bargain 27-gauge — and near the coast, ask for the better galvanization and paint warranty rather than the thinnest builder-grade panel.
Aluminum & Glass
The full-view anodized-aluminum-and-glass look that fits modern and mid-century architecture from Newport to Laguna. Aluminum won’t rust, which makes it a legitimately smart coastal pick, but the frames dent more easily than steel and the glass drives both price and weight — plan on heavier-duty springs as part of the install.
Wood
Nothing matches real wood curb appeal, and nothing demands more of you: refinishing every few years (faster on west- and south-facing exposures), real weight that requires oversized springs, and the top of the price chart. Cedar and redwood customs on architectural homes are where the $12,000+ figures live.
Composite / Faux Wood
Composite and overlay doors can offer a wood-like appearance with different care requirements from natural wood. Their installed price, weight, finish and maintenance depend on the exact construction. Compare the manufacturer’s care instructions and a like-for-like quote; a faux-wood door is not automatically lighter or maintenance-free.
New Garage Door Cost by Style
| Style | Typical premium over a basic raised-panel door |
|---|---|
| Traditional raised-panel | Baseline — the ranges in the cost table |
| Modern flush / clean-line | +15–35% |
| Carriage house | +30–60% |
| Full-view glass | Priced as aluminum & glass above |
Style is mostly a panel-design and hardware question, so it stacks on top of the material price. Traditional raised-panel and short-panel doors are the baseline. Modern flush designs cost a bit more for the cleaner skins and optional windows. Carriage-house styles add overlay boards, decorative hardware, and window sections — the premium buys the detail work. Windows of any kind typically add $200–$700 depending on glass and placement, and they’re worth pricing: a row of top-section windows changes the front of a house more per dollar than almost any other option.
Insulation Tiers and R-Value
Single-layer steel is uninsulated; two-layer doors add insulation; three-layer doors place insulation between exterior and interior steel. Both polystyrene and polyurethane may be used in insulated constructions. Confirm the selected model rather than assuming every layer count has one fixed rating.
Published section R-value measures a section or material, while a tested whole-door U-factor includes more of the assembly. Glazing, joints and perimeter seals also affect performance. Higher insulation does not replace an engineered wind rating or guarantee cooling-bill savings.
Compare the exact insulated and non-insulated quotes for the same size and design. For attached garages or rooms above, consider insulation alongside seals, noise and intended use. See the garage door insulation guide.
New Garage Door Cost by Size
| Size | Typical installed range (steel) | Notes |
|---|---|---|
| Single — 8×7 or 9×7 ft | $1,000–$2,200 | Standard single-car opening |
| Double — 16×7 ft | $1,500–$3,500 | Most OC two-car garages |
| Oversized — 18×8 ft and up | $2,800–$5,500+ | Wide, tall, or RV openings; heavier hardware |
Size scales price in two ways: more door, and more spring. A double door needs roughly twice the material and a properly matched dual-spring system, and once openings pass 16 feet wide or 7 feet tall, you’re into heavier-gauge track, commercial-leaning hardware, and sometimes engineered wind-load requirements. Non-standard openings (odd widths in older neighborhoods, arched openings, RV-height bays) are custom-order territory — the door itself costs more and the lead time stretches from days to weeks.
Labor, Haul-Away, and What Installation Includes
Every installed price on this page bundles the labor. Broken out, professional installation of a residential door typically represents $300–$700 of the total: removing the old door and springs, hanging and leveling new track, installing and tensioning the spring system, setting the sections, sealing the perimeter, reconnecting and adjusting the opener, and cycle-testing the balance and safety reverse.
The two add-ons worth understanding from the cost table: old-door removal and haul-away ($75–$250), which most installers bundle rather than itemize, and permits ($50–$300), which some Orange County cities require for door replacement — we handle the paperwork where it applies. If your opener is past its own lifespan, replacing it during the door install saves a second labor charge; ranges are on the opener installation cost page.
One thing an installed price should never skip: new perimeter weather seal and bottom astragal. A new door sealed with the old rubber is a corner cut — if your current door leaks at the edges, that’s a preview of why seal quality matters.
New Garage Door Cost by Brand
Compare equivalent opening sizes, construction, glass, finish and installation scope. A brand name alone does not determine price or warranty.
Clopay
Compare steel, composite-overlay, aluminum-glass and authentic-wood collections. Selected Canyon Ridge configurations reach section R-20.4; other models differ. Confirm current replacement-section availability and written coverage for the exact collection. See Clopay garage doors.
Amarr
Compare the selected Classica, Hillcrest, Lincoln, Olympus or Vista configuration. Construction, insulation, finish and warranty vary by model; Amarr is not automatically less expensive than every Clopay quote. See Amarr garage doors.
Wayne Dalton
Compare Classic Steel, carriage-house and aluminum-glass collections by exact model. Designer Steel 8310 is steel; the full-view aluminum-glass models are a different family. For existing TorqueMaster spring systems, our service is conversion to standard torsion only. Conversion is specified from door weight, track, clearance and compatible hardware. See Wayne Dalton garage doors.
New Door vs Panel Replacement
| Situation | Panel Replacement | New Door |
|---|---|---|
| One dented section, design still made | Yes — $250–$900 fixes it | No |
| Two or more damaged sections | Rarely — cost approaches a new door | Usually yes |
| Panel design discontinued | Only if a visible mismatch is acceptable | Usually yes |
| Damage plus 15–20 years of age | No — new sections on tired hardware | Yes — reset door and hardware together |
| Bent frame, rust-through, or racked sections | No — structural, not cosmetic | Yes |
The dividing line is simple: panel replacement is for partial, cosmetic-to-moderate damage on a door worth keeping — full details, matching realities, and per-section pricing live on the panel replacement cost page. A new door wins when damage spans sections, the design is discontinued, or the door was already near end of life — at that point every dollar into old sections is a dollar not going toward the door you’ll end up buying anyway. And if the damage is really a single failed component rather than the door itself, start at garage door repair cost instead; a $300 spring should never turn into a $3,000 door.
Real Factors That Affect New Garage Door Cost
When two neighbors get quotes that differ by thousands for “a new garage door,” these are the variables doing the work:
Material and gauge. The single biggest lever, per the material table — and within steel, panel thickness and layer count separate builder-grade from the door that still looks new in year fifteen.
Insulation tier. A pure comfort-and-stiffness upgrade of +$200–$1,000 that also buys quieter operation and better dent resistance.
Size and opening condition. Doubles and oversized openings cost more in door and hardware; out-of-square or non-standard openings add framing labor before the door even goes up.
Windows, hardware, and finish options. Glass sections, decorative hardware, and custom colors or stain finishes each add real money — this is where a $2,000 door becomes a $3,200 door one checkbox at a time.
Spring system and hardware grade. A quality install includes new torsion springs sized to the new door’s weight. Upgrading to high-cycle springs at install time is the cheapest that upgrade will ever be — see the spring cost guide for the cycle-rating math.
Permits, HOA, and wind-load rules. Some OC cities permit door replacements ($50–$300); HOAs in planned communities often must approve style and color; and wide doors in wind-exposed areas may need wind-load reinforcement, covered in our wind-rated door guide.
Lead time. In-stock steel doors install within days. Custom colors, composite overlays, and wood run two to eight weeks from order — worth knowing before you schedule around a broken door.
Old-opener compatibility. A heavier insulated door can overwork an aging opener. If yours is past ten years, budget the combined door-plus-opener install rather than discovering the opener’s limits a month later.
Coastal exposure. Within the beach cities, finish and hardware grade stop being cosmetic choices: galvanized track and fasteners, coated springs, and marine-tolerant finishes add modestly to the invoice and pay for themselves in years of avoided corrosion repairs.
A Huntington Beach coastal home chose an insulated steel double door with wind-rated tracks. The project landed in the upper-middle of the insulated-steel range above and was installed in a single day, old door hauled away.
Not sure the whole door actually needs replacing? Our repair-vs-replace breakdown walks through when a repair is the smarter spend.
New garage door cost FAQs
How much does a new garage door cost installed in Orange County?
Most homeowners spend $1,500–$3,500 for a standard double steel door installed. Single doors start near $1,000; insulated, custom, and wood doors cost more.
Is an insulated garage door worth the extra cost?
For attached garages, rooms above the garage, or homes in hot inland OC cities, yes — insulation reduces heat transfer and noise and improves energy efficiency, often paying back through comfort and lower cooling load.
Do I need a permit for a new garage door in Orange County?
Some cities require a permit for a full replacement, while many treat a like-for-like swap as routine. Permit fees vary by city; we handle the details and itemize any fee in your quote.
Do you offer financing on new garage doors?
Yes — financing is available on qualifying new-door projects so you can spread the cost. Ask about options when you book your free estimate. See financing.
How long does a new garage door installation take?
A standard residential installation is usually completed in a few hours. Custom or oversized doors may take longer; we’ll give you a timeline with your estimate.
What is the most popular garage door material in Orange County?
Insulated steel, by a wide margin — it’s the best durability-per-dollar, comes in every style, and handles coastal air well with a quality finish. Aluminum-and-glass is the fastest-growing choice on modern builds near the coast.
How much does a wood garage door cost?
Real wood and faux-wood constructions have different price and care requirements. Use the material ranges above as planning estimates, then compare the exact size, construction, finish and written maintenance instructions. Composite overlays still require manufacturer-specified cleaning and finish care.
What R-value do I need?
Choose insulation for garage use, adjacent living space and the complete door assembly. Compare the selected model’s section R-value and available tested whole-door U-factor; glazing and seals matter too. Ratings above R-18 are not automatically meaningless, and no single R-value is right for every home.
Does a new garage door include new tracks and springs?
Yes — a proper installation replaces the track and installs new springs sized to the new door’s weight. Reusing old track or springs with a new door is a shortcut that causes binding and early failures; if a quote is oddly cheap, that’s often where the money went.
Can I keep my existing opener with a new door?
An existing opener can be retained only if it is compatible, operates safely and meets applicable requirements. In California, a replacement residential door may not be connected to an existing opener without a functioning battery-backup feature. Confirm the opener model, rail, door balance and installation requirements before deciding to retain it. See our California requirements guide.
How much is labor to install a garage door?
Roughly $300–$700 of the installed price, covering removal, track and spring installation, section assembly, sealing, opener reconnection, and testing. It’s rarely quoted separately — installed pricing keeps the number honest.
Do new garage doors increase home value?
Yes — garage door replacement consistently ranks at or near the top of national cost-vs-value remodeling studies for resale return, because it changes a large share of the home’s street view for a modest price. Agents in OC routinely recommend it before listing.
What sizes do garage doors come in?
Standard singles are 8×7 and 9×7 ft; standard doubles are 16×7. Heights of 8 ft and widths to 18 ft are readily available, and odd sizes for older neighborhoods or RV bays are custom-ordered — at a premium and a longer lead time.
How long will a new garage door last?
The door itself, 20–30 years with basic care. Its wear parts run on their own clocks: springs by cycle count (7–12 years standard), openers 10–15 years, rollers and seals in between. That’s why an annual tune-up outlives any single part.
Should I replace one panel or the whole door?
One damaged section on a door whose design is still made: replace the panel. Multiple sections, a discontinued design, or a door already past 15 years: put the money toward a new door. The comparison table above walks through each case.
The ranges and guidance on this page were written and reviewed by our licensed garage door technicians (CSLB #994802), serving Orange County since 2013 - based on more than 15,000 completed repairs and installations, 800+ customer reviews & ratings across multiple platforms.
Get a free new garage door estimate
We publish honest pricing so you can plan — free on-site estimates, upfront quotes, financing available, and no surprise fees.
Call (714) 464-2881 — available 24/7 across Orange County.
Related pricing pages
- garage door repair cost
- garage door panel replacement cost
- garage door opener installation cost
- garage door spring replacement cost
- commercial garage door cost
Related services
New garage doors by city
- garage door installation Irvine
- garage door installation Anaheim
- garage door installation Santa Ana
- garage door installation Huntington Beach
- garage door installation Newport Beach
- garage door installation Costa Mesa
- garage door installation Orange
- garage door installation Fullerton