top of page
Search
  • Mike R.

How to Fix a Garage Door That’s Off-Track

Homeowners needing garage door repair in Orange County CA often find their door has gotten off-track. It is a common issue. Now, fixing it can be a tricky task, although it is manageable with the correct approach.

Before we look at our step-by-step guide to help you get your garage door back on track, we would like to remind you that it is often advisable to call in the experts to help you with these kinds of repairs, which brings us to our first point: safety!



In this article, we will look at some of the most common garage door repairs in Orange County.

Safety: Before beginning any work on your garage door, make sure that the garage door opener is disconnected from power to prevent any accidents. You can usually do this by pulling the release cord or flipping the breaker. Garage doors are heavy with various moving parts, so if you are looking for garage repair in Newport Beach or elsewhere in Orange County, then don’t hesitate to call in our team of experts.

Assess the Damage: Inspect the tracks, rollers, hinges, and springs to identify the source of the problem. Look for any bends, dents, or obstructions that might be causing the door to come off-track. Even better, have our experts cast their trained eye over the whole thing  they are far more likely to pinpoint any potential issues than the untrained eye.

Clear the Tracks: One task that you may wish to attempt by yourself is to remove any debris, dirt, or obstructions from the tracks using a stiff brush or cloth. This way, you may be able to ensure that the tracks are clean and free from any obstacles that might hinder the door's movement.

Straighten the Tracks: If the tracks are bent or misaligned, they'll need to be straightened out. For garage doors in places such as Tustin CA or Lake Forest, you can all out our skilled workmen to perform this important task for you. Alternatively, you can have a go yourself using a rubber mallet or a block of wood and a hammer, but do be gentle and careful to avoid causing further damage.

Adjust the Rollers: Another key task is to inspect the rollers to see if they're damaged or worn out. If they're still in good condition, you could use a wrench to loosen the bolts holding the rollers in place, then adjust them as needed and tighten the bolts again. While you have your toolbox open, you may also wish to check all the nuts, bolts, and screws holding the tracks and other hardware in place.

Lubricate Moving Parts: Apply lubricant to the rollers, tracks, hinges, and springs to reduce friction and ensure smooth operation.

 

In summary, by following these steps, you should be able to fix an off-track garage door and get it back in proper working condition. However, it's often best to seek professional help to avoid further damage or injury, so don’t hesitate to call our team of trained professionals for all garage door repairs across Orange County CA. 

Kommentare


bottom of page